圖爾克新增了兩種模塊以增強excom I/O系統的可用性。

    Mülheim, October 21, 2014 –圖爾克為其excom系統增加了1個電阻模塊和2/3線傳感器模塊。TI41，新的4通道的電阻模塊適用于連接PT100、Ni100和Cu100等2,3或4線制溫度傳感器。得益于16位轉換精度，這些模塊可提供高精度的測量方案。該產品可滿足化工及制藥行業1/10K測量精度的要求。

圖爾克新型模塊增強了excom I/O系統的可用性

    Mülheim, October 21, 2014 – Turck has added a resistance and a 2/3 sensor module to its range of modules for the excom I/O system. The new TI41 4-channel resistance module is suitable for connecting PT100, Ni100 and CU100 temperature sensors in 2, 3 or 4-wire circuits. The 16-bit processing of the modules provides a particularly high measuring range resolution. In this way applications in the chemical and pharmaceutical industry can be implemented, which require a measuring accuracy of 1/10 Kelvin.

    新的DI40-N開關量輸入模塊可連接3線制NPN或PNP傳感器。3線制傳感器將直接由excom系統供電，從而無需外部供電及接線。模塊診斷特性提供了對3線制傳感器的故障監控功能。除3線制傳感器外，其同樣可以連接NAMUR（DIN EN 60947-5-6）傳感器或機械觸點。短路和斷路監控功能同樣可用于機械觸點。

    The new DI40-N digital input module enables the user to connect 3-wire NPN and PNP sensors. The 3-wire sensors are supplied here directly from the excom system, thus eliminating the need for external wiring for an auxiliary supply. The diagnostic features of the module also provide information on faulty periphery when the 3-wire sensors are connected. Besides 3-wire sensors, it is also possible to connect NAMUR (DIN EN 60947-5-6) sensors or mechanical contacts. Wire break or short circuit monitoring is also possible when using mechanical contacts.

    與excom其它種類的模塊類似，新模塊每個通道的參數，如線路監控、值替換和阻尼等，均可通過控制系統直接進行設定。

    As with all excom modules, the setting of parameters such as for cable monitoring, value substitution and damping is carried out by channel and is initiated exclusively from the control system.