作者：北京廣利核系統工程有限公司 郝愛霞，李剛，王連春，李俊卿，柏祥基，馮四軍  

摘要：核電站DCS儀控設備的電氣接線工藝方法較多，其中最常見的連接工藝為螺釘緊固方式。其緊固力矩不僅保證了設備之間電氣連接的可靠性，還可實現連接導線拆、接操作維護的方便性，但也存在螺釘緊固力矩應力釋放，以及旋松或旋緊操作造成螺釘擰花、溢扣、斷裂等質量問題。因此，對核電站DCS儀控設備電氣端接采用直插式彈簧連接工藝方法進行了研究，報告了直插式彈簧連接工藝在核電站DCS儀控設備電氣端接中的應用現狀；按照核安全法規對安全級物項制造工藝過程控制要求，對電氣端接連接質量的可靠性進行了影響分析，通過測試驗證的方式，證明了直插式彈簧連接工藝的可靠性。直插式彈簧連接工藝相較于螺釘緊固操作，更為簡單、易于控制，不僅能規避螺釘緊固連接的質量問題，還可提高接線操作效率，提出了直插式彈簧連接工藝在核電站安全級DCS儀控設備電氣端接中應用的建議。

關鍵詞： 電氣端接；直插式彈簧連接工藝；可靠性；機械強度；彎曲測試；拔出測試；振動試驗

Abstract: There are many electrical wiring process methods for DCS  instrumentation and controlling device in nuclear power plants, among  which the most common connection process is screw fastening.  The fastening torque not only ensures the reliability of the electrical  connection between equipment, but also realizes the convenience  of operation and maintenance of disconnection and connection of  connecting wires. However, there are also quality problems, such as  the stress release of the screw tightening torque, and the screw to  twist, overflow, break caused by tightening or loosening operation.  Therefore, the use of in-line spring connection technology for the  electrical termination of DCS instrument and controlling device in nuclear  power plants is studied, and the application status of the in-line spring  connection process in the electrical termination of DCS instrument and  control equipment in nuclear power plants is reported. Therefore, the  use of in-line spring connection technology for the electrical termination  of DCS instrument and controlling device in nuclear power plants is  studied, the application status of the in-line spring connection process in  the electrical termination of DCS instrument and control equipment in  nuclear power plants is reported, and controlling requirements of safety level items, the reliability of the electrical termination  connection quality is analyzed in accordance with the  nuclear safety regulations on the manufacturing process.  The Test verification proved the reliability of in-line spring  connection process. Compared with the screw fastening  operation, the in-line connection spring connection process  is simpler and easier to control. It can not only avoid the  quality problems of screw fastening connection, but also  improve the efficiency of wiring operation. Finally, we  propose the suggestions on the application of in-line spring  connection technology in the electrical termination of  safety-level DCS instrumentation and control equipment in  nuclear power plants

Key words: Electrical termination; In-line spring connection  process; Reliability; Mechanical strength; Bending test; Pullout test; Vibration test

在線預覽：直插式彈簧連接工藝的可靠性研究.pdf

摘自《自動化博覽》2021年8月刊