作者：張登超（1983-），男，北京人，本科，現就職于北京廣利核系統工程有限公司，主要從事核電廠全范圍模擬機的研究、設計、調試等工作。

摘要：仿真方式在核電廠數字化儀控系統全范圍模擬機研究、培訓、設計等方面中起著重要作用。本文以陽江二期全范圍模擬機為例，研究分析了邏輯控制層level1采用虛擬實物仿真方式、人機界面監控層level2采用實物仿真方式、KDS系統采用翻譯仿真方式；結合現場應用情況，從精度、逼真度、穩定性、經濟性、維護方面對比國內之前某核電站全范圍模擬機的優缺點，得出當前采用的仿真方式易維護、成本降低約50%、逼真度達到95%，且更穩定?？蔀楹罄m開發更先進DCSFSS數字化儀控系統提供重要的參考價值。

關鍵詞：核電；全范圍模擬機；FSS；仿真方式

Abstract: The simulation mode plays an important rolein the research, training and design of the full scopesimulator of the digital I & C system in nuclear powerplant. Taking Yangjiang Phase II full scope simulatoras an example, this paper analyzes the logic controllevel1 employing virtual physical simulation mode,man-machine interface monitoring level2 employingphysical simulation mode, and KDS(Diversity ActuationSystem)system employing translation simulationmode. Combined with field application situation,the advantages and disadvantages of the full scopesimulator of a nuclear power plant before in Chinawere compared from the aspects of accuracy, fidelity,stability, economy and maintenance. It is concludedthat the current simulation method is easy to maintain,the cost is reduced by about 50%, the fidelity is up to95%, and it is more stable. It can provide importantreference value for the subsequent development ofmore advanced DCSFSS digital I & C system.

Key words: Nuclear power; Full scope simulator; FSS;Simulation ways

在線預覽：核電廠數字化儀控系統全范圍模擬機仿真方式研究及應用

摘自《自動化博覽》2020年7月刊